TRD MR2 Spyder Parts

Toyota MR2 Spyder, TRD Performance Front Brake Pads

PTR09-52070

These are high friction performance pads are made from a Kevlar and ceramic-strengthed compound. They provide a great combination of cold and hot friction, maximum operating termperature, and low noise levels. TRD brake pads come with anti-squeal shims. Designed to fit OE calipers. 2004-2007

Toyota MR2 Spyder, TRD, Brace, Front Strut Tower Suspension

PTR04-17000-S1

TRD Strut Tower Braces increase the chassis rigidity reducing flex and handling imprecision in aggressive cornering or rough-road driving. Constructed of lightweight, high-strength steel tubing.

Toyota MR2 Spyder, TRD, Member Brace Suspension

PTR04-17001-02

The frame members reinforce that chassis at key flex points down below for enhanced handling and response. (2000 - 2005)

Toyota MR2 Spyder, TRD Front Strut Tower Brace

PTR04-17900-02

TRD Strut Tower Braces increase the chassis rigidity reducing flex and handling imprecision in aggressive cornering or rough-road driving. Constructed of lightweight, high-strength steel tubing. (1990 - 1995)

Toyota MR2 Spyder, TRD Front Sway Bar

PTR04-17900-05

TRD Sway Bars typically provide a 25% to 100% stiffer ride than stock. They are constructed of high-quality spring steel and powder coated to prevent corrosion and road damage.

Toyota MR2 Spyder, TRD Rear Sway Bar

PTR04-17901-06

TRD Sway Bars typically provide a 25% to 100% stiffer ride than stock. They are constructed of high-quality spring steel and powder coated to prevent corrosion and road damage.
(1990 - 1995)

Toyota MR2 Spyder, TRD Rear Strut Tower Brace

PTR04-17901-50

TRD Strut Tower Braces increase the chassis rigidity reducing flex and handling imprecision in aggressive cornering or rough-road driving. Constructed of lightweight, high-strength steel tubing. (2000 - 2003)

Toyota MR2 Spyder, TRD Lowering Springs Suspension Set

PTR04-17850-03

TRD Lowering Springs typically lower the vehicle from 1 to 1.5 inches, front and rear, lowering the center of gravity of quicker turn-in, enhanced steering reponse and cornering. (1985 - 1989)

Toyota MR2 Spyder, TRD Lowering Springs Set

PTR04-17900-10

TRD Lowering Springs typically lower the vehicle from 1 to 1.5 inches, front and rear, lowering the center of gravity of quicker turn-in, enhanced steering reponse and cornering. (1990 - 1995)

Toyota MR2 Spyder, TRD Air Filter

PTR05-20000-07

Pre-oiled and ready to install. Washable and reusable. Exact drop-in replacement for stock air filter. (2000 - 2005)

Toyota MR2 Spyder, TRD Oil Filters

PTR43-33010

TRD High Performance Oil Filters incorporate state-of-the-art design and materials offering superior protection. The filter uses 3 plies of 100% synthetic glass/polyester blend filtration meida that 98% efficient at 20 microns - thats smaller than pollen.

Toyota MR2 Spyder, TRD Filter Cleaning Kit

PTR43-00088

Created specifically for vehicles already equipped with a TRD performance air filter, the cleaning kit includes everything owners need to help ensure the superior protection and performance of the air filter.

Toyota MR2 Spyder, TRD Quickshifter

PTR04-17020-09

TRD Quickshifters deliver, faster, positive shifting. Repositioned pivot points provide up to a 20% shorter shift throw. (2000 - 2005)

Toyota MR2 Spyder, TRD Quickshifter

PTR04-17851-03

TRD Quickshifters deliver, faster, positive shifting. Repositioned pivot points provide up to a 20% shorter shift throw. (1985 - 1989)

Toyota MR2 Spyder, TRD Quickshifter

PTR04-17900-06

TRD Quickshifters deliver, faster, positive shifting. Repositioned pivot points provide up to a 20% shorter shift throw. (1990 - 1995)

Toyota MR2 Spyder, TRD Plug Wires

PTR04-17920-02

TRD Spark Plug Wires use a low-resistance core to deliver a hotter, higher-voltage spark. A 7mm silicon insulated jacket prevents crossfire. (1992 - 1993)

Toyota MR2 Spyder, TRD Metal Cylinder Head Gasket

PTR04-17900-03

TRD metal head gaskets are a direct replacement for the factory head gasket and are better for higher cylinder pressure and heat. (1985 - 1989)

All MR2 with 4AG ELC engine. Recommended torque spec is 47 ft-lbs or 650 kg/cm. (0.8mm thick with bore size of 82.55mm.)

Toyota MR2 Spyder, TRD Metal Cylinder Head Gasket, 3SGTE

PTR04-17910-01

TRD metal head gaskets are a direct replacement for the factory head gasket and are better for higher cylinder pressure and heat. (2007)
Recommended torque spec is 47 ft-lbs or 650 kg/cm. (.8mm thick with bore size of 82.55mm.).

Toyota MR2 Spyder, TRD Large Leather Shift Knob, Manual Transmission

PTR04-00000-05

This traditional TRD shift knob features a hand-laced black leather-wrapping, along with a red TRD logo along the side for added appeal. Provides the 5-speed manual shifter with an edge in appearance, while also enhancing the up/down shifting experience. (2000 - 2005)

Toyota MR2 Spyder, TRD Ball Shift Knob, Manual Transmission

PTR04-00000-06

This classic ball-type TRD shift knob features a hand-laced black leather-wrapping, with a carbon fiber insert on top that includes the TRD logo in white. It enhances the up/down shifting experience, and the appearance, of 5-speed manual transmission vehicles.
(2000 - 2005 5 Speed, 2003-2005 6 Speed)

Toyota MR2 Spyder, TRD Shift Knob, Billet Aluminum

PTR04-17001-01

TRD Shift Knobs give your manual shift Toyota an edge in both looks and shifting feel. Installation is easy: a self tapping sleeve assures a tight screw-on fit to any M12 x .25 metric Toyota shift lever.

Toyota MR2 Spyder, TRD Oil Caps, Japan

PTR04-12108-02

Manufactured from forged, highly polished billet aluminum, the TRD oil cap features the TRD logo and chevron to dress up the engine compartment with a high-tech, race-ready appearance. It’s finished with a high-luster coating to maintain appearance for years to come. (2001 - 2005)

Toyota MR2 Spyder, TRD Oil Cap

PTR35-00070

Manufactured from forged, highly polished billet aluminum, the TRD oil cap features a red on black TRD logo to customize the engine compartment with a high-tech, race-ready appearance. It’s finished with a high-luster coating to maintain appearance for years to come. (2000 - 2005)

Toyota MR2 Spyder, TRD Clutches Assembly

PTR15-20000-25

Kit features a high-capacity TRD pressure plate. Stiffer diaphragm springs and load straps increase clamping force approximately 25%, with an increase in pedal pressure of just 10%. (2002 - 2005)

Toyota MR2 Spyder, TRD Clutch Disk, Sports Facing Type

31250-AE952

Heavy duty with a durable, heat-resistant friction material and reinforced components suitable for street or racing use. These clutch disks ensure consistent, uncompromising performance under extreme driving conditions, such as gymkhana or road circuit use. CLUTCH DISC (METAL FACING TYPE) For the serious racer or performance enthusiast, TRD offers a metallic facing for u se on vehicles with highly modified engines that are used in the most rigorous of racing or motor sports applications. The facing is made of a special alloy that provides extraordinary wear and heat resistance combined with outstanding durability.

Toyota MR2 Spyder, TRD Clutch Cover

31210-AE100

To provide maximum performance under high-temperature conditions, TRD Clutch Covers are reinforced for added strength, provide additional clamping force and are designed tp provide optimum performance when used with TRD clutch disks.

Toyota MR2 Spyder, TRD Lightweight Chrome Molly Flywheel

13405-TF210

The TRD lightweight flywheel dramatically improves engine response from standstill and throughout the rev range by reducing the flywheel weight from 24 to 50%. Designed to increase acceleration across the entire rev range. Ranges from 24 to 50% lighter than standard. Initial inertia reduced by 22 to 50% dramatically improving engine response. Manufactured from strong Chromium Molybdenum Steel.